澳洲移民 你問我答 (2)

巴打，燒焊前境點睇？會唔會好快被移除出list？

應該唔會，燒焊（welder）呢種技工類一直都短缺。

係悉尼讀緊Hospitality management bachelor

有無機會可以留到係到/技術移民？

獨立技術移民做唔到。能否考慮NSW州政府擔保去偏遠地區做hotel manager？

想問下如果IT Networking既係咪好難過到去澳洲？

之前係澳洲WHV留過一年幾，但都係做工廠既工同IT無關，而家係香港做左年幾野

如果我係香港儲多兩年經驗再去澳洲讀個master大唔大機留底？真係好掛住澳洲既生活

香港得BBA higher depoma, 係澳洲果邊為左拿pr，係咪只可轉讀到會計，2年畢業?
如果轉讀電腦，可否都可以2年?

唔係凈係可以讀會計啊。會計同IT都係競爭非常大既專業。

反正你都係要轉專業既話，肯定最少要讀兩年以上。

你可以同願意既話可以考慮護理/社工/測量等。

點解你讀完成個Bachelor只用年半？係咪用Diploma申請過學分豁免？英文班唔算入去。

Internship對移民無咩直接幫助，不過打好關係secure一份工作會對你既將來有幫助。

好似我上面所講，你返左去香港就無咁想移民架啦，操作上亦會麻煩好多。

Architecture唔需要1年工作黎做評估啊。需要1年工作戈個係Landscape Architect。唔一樣的。

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

把打 有沒連絡方法？ 岩岩收到refusal letter

你有高登account可以係戈邊PM我。

無既話，或者你大概描述下情況，or copy重點上黎睇下？

457轉186今朝收到信
話training 唔附合要求
又話唔夠証椐
好多都係得bank transactions 無formal invoice …

哦，最common既一個拒簽理由。我無見過真實材料我就唔評論了。你地應該係搵代理做既？有無考慮上訴？

有啊， 有無得搞？ 有搵agent 搞 但好似渣渣地⋯⋯
其實所有野都係有真實發生 只不過無formal invoice …
知唔知其他人上訴成功率高唔高？
我個457下年先到期 咁係唔係都可以留到下年？

暫時無人上訴成功過。因為係最近半年先開始用呢個理由拒簽，依家上訴要等12個月排期，所以仲未有案例可循。

你可以考慮按拒簽理由搞番好然後重新遞交一次。

Thx bro. 可以再遞？ 咁良民証果啲用不用重新再弄？

可以再遞交。

無犯罪記錄/良民證係批前一年內有效，萬一過左期就睇移民官要求是否要重新申請。

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

宜家唔叫SOL啦，update下先。

宜家係MLTSSL（即係以前既SOL），同STSOL（即係以前既CSOL）。你自己睇係呢兩個表睇下自己背景學歷工作經驗最符合邊個occupation先。

幫fd問
it 狗 本科grad 三年香港工作經驗
如果ielts 6分 係咪就可以做citizen
定再要係個邊留幾多年先得？

得45分
ACS硬扣兩年 工作經驗無分
比你拎到PR都要留果邊4-5年先拎到citizen

謝回覆
但如果果三年工作經驗都算係相關
佢會跟咩黎決定

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

宜家唔叫SOL啦，update下先。

宜家係MLTSSL（即係以前既SOL），同STSOL（即係以前既CSOL）。你自己睇係呢兩個表睇下自己背景學歷工作經驗最符合邊個occupation先。

Thanks 巴打
係STSOL呀，會唔會易啲？
謝謝

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

幫fd問
it 狗 本科grad 三年香港工作經驗
如果ielts 6分 係咪就可以做citizen
定再要係個邊留幾多年先得？

得45分
ACS硬扣兩年 工作經驗無分
比你拎到PR都要留果邊4-5年先拎到citizen

謝回覆
但如果果三年工作經驗都算係相關
佢會跟咩黎決定

扣兩年係由於你既degree係非澳洲degree，所以需要扣起兩年工作經驗黎滿足職業評估用。

你要加油考到4個7，能夠移民既機會先會大D。

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

宜家唔叫SOL啦，update下先。

宜家係MLTSSL（即係以前既SOL），同STSOL（即係以前既CSOL）。你自己睇係呢兩個表睇下自己背景學歷工作經驗最符合邊個occupation先。

Thanks 巴打
係STSOL呀，會唔會易啲？
謝謝

唔會，係STSOL無辦法直接獨立技術移民，係MLTSSL先可以。所以係邊個occupation？

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

樓主方便留tg嗎

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

都要30個月, 但上面果個係mel, 咁咪拎唔到州sponsor?
等我再搵搵有無其他州有呢類package 先

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

都要30個月, 但上面果個係mel, 咁咪拎唔到州sponsor?
等我再搵搵有無其他州有呢類package 先

如果偏遠地區無呢類course 讀既話我寧可係 Sydney 讀, 起碼有親戚係度唔洗煩食住, 仲可以問下有無pt 做

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

宜家唔叫SOL啦，update下先。

宜家係MLTSSL（即係以前既SOL），同STSOL（即係以前既CSOL）。你自己睇係呢兩個表睇下自己背景學歷工作經驗最符合邊個occupation先。

Thanks 巴打
係STSOL呀，會唔會易啲？
謝謝

唔會，係STSOL無辦法直接獨立技術移民，係MLTSSL先可以。所以係邊個occupation？

Thanks巴打
我知係拎TR呀，去到捱2年+1年工作經驗再申請PR囉
晏少少PM你

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

都要30個月, 但上面果個係mel, 咁咪拎唔到州sponsor?
等我再搵搵有無其他州有呢類package 先

如果偏遠地區無呢類course 讀既話我寧可係 Sydney 讀, 起碼有親戚係度唔洗煩食住, 仲可以問下有無pt 做

https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology
https://www.melbournepolytechnic.edu.au/courses/advanced-diploma-of-engineering-technology-2
adv. dip 同 dip 個入學要求, 學費同年期都係一樣, 是咪可以直接讀adv. dip? adv. dip 讀完仲可以trans 12 subjects/1.5 years credit into Melbourne Polytechnic Engineers Australia Accredited program HEBETC Bachelor of Engineering Technology (Civil), dip 得 6 subjects/6 months credit

係monash 讀physio
畢業應該留係澳洲工作定返香港搵工
如果返香港做幾年野 遲啲靠物理治療技術移民既機會大唔大

麻煩了

係monash 讀physio
畢業應該留係澳洲工作定返香港搵工
如果返香港做幾年野 遲啲靠物理治療技術移民既機會大唔大

麻煩了

人哋都話咗一返完香港可以返澳洲機會超細。你留喺澳洲一年工作=喺香港3年個分，返去香港做為乜？

巴打，請問 IT 60-65分仲會唔會有機會收到邀請？
Age - 30
Degree - 15
擔保 - 5/10
IELTS - 10
-------------
=60-65

60分好難，65既話睇你係邊個specialisation啦，都要等好耐。

唔該巴打
SOL會唔會易啲有？

宜家唔叫SOL啦，update下先。

宜家係MLTSSL（即係以前既SOL），同STSOL（即係以前既CSOL）。你自己睇係呢兩個表睇下自己背景學歷工作經驗最符合邊個occupation先。

Thanks 巴打
係STSOL呀，會唔會易啲？
謝謝

唔會，係STSOL無辦法直接獨立技術移民，係MLTSSL先可以。所以係邊個occupation？

Thanks巴打
我知係拎TR呀，去到捱2年+1年工作經驗再申請PR囉
晏少少PM你

PM咗你高登account

樓主方便留tg嗎

唔太方面，因為覆唔切。有咩問題請係度留言或者高登PM我。

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

都要30個月, 但上面果個係mel, 咁咪拎唔到州sponsor?
等我再搵搵有無其他州有呢類package 先

如果偏遠地區無呢類course 讀既話我寧可係 Sydney 讀, 起碼有親戚係度唔洗煩食住, 仲可以問下有無pt 做

你仲要注意埋課程收唔收海外學生。你上面個list就有唔收international students既。

Locksmith Courses

The TAFE sector offers the following certificate and/or diploma locksmith courses:

State Provider Course Name Link
QLD Skills Tech Certificate III In Locksmithing http://www.skillstech.tafe.qld.gov.au/
NSW Sydney Institute of TAFE Certificate III In Locksmithing http://www.sit.nsw.edu.au/
VIC Melbourne Polytechnic Certificate III In Locksmithing http://www.melbournepolytechnic.edu.au
WA Challenger TAFE Certificate III In Locksmithing http://www.challenger.wa.edu.au/
* Specialised locksmithing training is not provided by the TAFE sector in South Australia, Tasmania, Canberra, Darwin or regional Australia

Students in these locations are therefore obliged to attend the TAFE college nearest to them and in such cases travel and living-away-from-home subsidies are available (applies to Australian apprentices only).

佢咁講即係唔可以係塔省讀拎洲擔保果5分?
btw google 咗篇blog 有寫原來NATTI 中譯英唔易考...

同埋個網得CERT II 同CERT III, 無CERT IV 都係無用

岩岩做左小小research。要做Locksmith應該要CIII + Diploma。例如Diploma of Engineering Technology。

Locksmith 無得齋讀diploma 就可以做到
即係硬讀18+24個月？

No，CIII + Diploma會係一個packaged course。兩個一齊讀完要18+12個月。
可參考：
https://www.melbournepolytechnic.edu.au/courses/certificate-iii-in-locksmithing-2
https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology/

都要30個月, 但上面果個係mel, 咁咪拎唔到州sponsor?
等我再搵搵有無其他州有呢類package 先

如果偏遠地區無呢類course 讀既話我寧可係 Sydney 讀, 起碼有親戚係度唔洗煩食住, 仲可以問下有無pt 做

https://www.melbournepolytechnic.edu.au/courses/diploma-of-engineering-technology
https://www.melbournepolytechnic.edu.au/courses/advanced-diploma-of-engineering-technology-2
adv. dip 同 dip 個入學要求, 學費同年期都係一樣, 是咪可以直接讀adv. dip? adv. dip 讀完仲可以trans 12 subjects/1.5 years credit into Melbourne Polytechnic Engineers Australia Accredited program HEBETC Bachelor of Engineering Technology (Civil), dip 得 6 subjects/6 months credit

呢個問題我真係唔確定。你可以用website右下角既 instant chat messenger直接問學校。