AMD討論POST(73) 睇#1(Updating ) &有時間幫手填資料

你搞少佢一陣好唔好

係咪話DDR5而家有on-chip ECC？

呢個on chip唔同傳統個個ECC, 佢只確保d data係條ram上面唔會錯, 同真ECC仲有大距離

邊有平卡

好心佢就set做default啦

屌呀？

Core 2 搞咩？？

真心唔知咩事
而家 RAM 行緊 Auto

你套野成功走到未

我真係恭喜曬

我想問下行 y-Cruncher，跑到某一粒 core 會黑 mon 重開，係代表嗰粒 core negative 得太多，定係其他 core 有問題
因為有啲 core 唔得就會有 error log，冇 log 黑 mon 又等唔等於嗰個 core 有問題

20:28:50 - Set to Core 3 (CPU 6)
                 + Setting the affinity to 64
                 + Successfully set the affinity to 64
           Running for 10 minutes (Auto-Mode)...
                 + 
                 + 20:29:00 - checking CPU usage: 0%
                 + 20:29:00 - ...the CPU usage was too low, waiting 2000ms for another check...
                 + Process Id: 13880
                 + 20:29:00 - checking CPU usage again (#1): 0%
                 +            still not enough usage (#1)
                 + 20:29:00 - ...the CPU usage was too low, waiting 2000ms for another check...
                 + Process Id: 13880
                 + 20:29:00 - checking CPU usage again (#2): 0%
                 +            still not enough usage (#2)
                 + 20:29:00 - ...the CPU usage was too low, waiting 2000ms for another check...
                 + Process Id: 13880
                 + 20:29:00 - checking CPU usage again (#3): 0%
                 +            still not enough usage, throw an error
                 + There has been an error with the stress test program!
                 + Error type: CPULOAD
ERROR: 20:29:15
ERROR: y-Cruncher seems to have stopped with an error!
ERROR: At Core 3 (CPU 6)
ERROR MESSAGE: The y-Cruncher process doesn't use enough CPU power anymore (only 0% instead of the expected 3.12%)
                 + The stress test program is y-Cruncher, no detailed error detection available
                 + There has been some error in Test-ProcessUsage, checking (#1)
                 + Trying to close the stress test program to re-start it
                 + Trying to close the stress test program
                 + Trying to close y-Cruncher
                 + Trying to gracefully close y-Cruncher
                 + y-Cruncher closed

應該都係Zen3咁 ccd0體質好過ccd1

我屌係因為有新版 CoreCycler
用咗新嘅再跑過

ccd 0 好過ccd1好似係kind of 大家都認同
第二就係等更新算

仲有咩更新
都 support Zen 4

應該到7950x3d出就會開始清晰點玩(ff)

5800x3d 打機成90度
不過好似冇降頻，咁樣係咪可以唔使理

唔使理

淨係打機都咁
咁做d cpu intensive task ge 應該會thermal throttle?

降頻到1.2v 之後穩定83-85左右
用更280水冷，我諗應該係水泵就嚟玩完

初代X3D係熱D


下代zen4 x3d 比埋thermal limit

7000個蓋咁厚
3d都炒啦