即係msi 未test 過就出貨突發！NVIDIA 發現 RTX 3080 / 3090 有設計問題需要回收！
大東亞香港民眾國
382 回覆
189 Like
10 Dislike
即係msi 未test 過就出貨公道啲講
係啲廠偷料先搞成咁姐
牙石無偷料或成最大贏家
係啲廠偷料先搞成咁姐
牙石無偷料或成最大贏家
爬文啦
用上邊講係一樣有事wor
ALL IN AMD
PCM領先全球新聞
雞+同牙石是咪收到d板黎加工果陣已經feel到有問題，所以唔敢放出d高階版本出街ROG AORUS都仲未出街
ROG AORUS都仲未出街EVGA
Recently there has been some discussion about the EVGA GeForce RTX 3080 series.
During our mass production QC testing we discovered a full 6 POSCAPs solution cannot pass the real world applications testing. It took almost a week of R&D effort to find the cause and reduce the POSCAPs to 4 and add 20 MLCC caps prior to shipping production boards, this is why the EVGA GeForce RTX 3080 FTW3 series was delayed at launch. There were no 6 POSCAP production EVGA GeForce RTX 3080 FTW3 boards shipped.
But, due to the time crunch, some of the reviewers were sent a pre-production version with 6 POSCAP’s, we are working with those reviewers directly to replace their boards with production versions.
EVGA GeForce RTX 3080 XC3 series with 5 POSCAPs + 10 MLCC solution is matched with the XC3 spec without issues.
Also note that we have updated the product pictures at EVGA.com to reflect the production components that shipped to gamers and enthusiasts since day 1 of product launch. Once you receive the card you can compare for yourself, EVGA stands behind its products!
— Jacob Freeman, EVGA Forums
ASUS
ASUS has changed the design in pre-production. No official statement was made.
Recently there has been some discussion about the EVGA GeForce RTX 3080 series.
During our mass production QC testing we discovered a full 6 POSCAPs solution cannot pass the real world applications testing. It took almost a week of R&D effort to find the cause and reduce the POSCAPs to 4 and add 20 MLCC caps prior to shipping production boards, this is why the EVGA GeForce RTX 3080 FTW3 series was delayed at launch. There were no 6 POSCAP production EVGA GeForce RTX 3080 FTW3 boards shipped.
But, due to the time crunch, some of the reviewers were sent a pre-production version with 6 POSCAP’s, we are working with those reviewers directly to replace their boards with production versions.
EVGA GeForce RTX 3080 XC3 series with 5 POSCAPs + 10 MLCC solution is matched with the XC3 spec without issues.
Also note that we have updated the product pictures at EVGA.com to reflect the production components that shipped to gamers and enthusiasts since day 1 of product launch. Once you receive the card you can compare for yourself, EVGA stands behind its products!
— Jacob Freeman, EVGA Forums
ASUS
ASUS has changed the design in pre-production. No official statement was made.
所以partner出嘅卡都要經NV批准先出得，所以其實責任喺NV度
所屌你老母啲貨有問題仲夠膽早賣公道啲講
係啲廠偷料先搞成咁姐
牙石無偷料或成最大贏家以有partner出嘅卡都要經NV批准先出得，所以其實責任喺NV度
炒價買果d
助長炒風，抵你哋
助長炒風，抵你哋
代理按建議售價同你回收
有關係都未定
ROG STRIX /AORUS 呢D高階卡一定BOOST得更高
可能因為發現呢個問題要改DESIGN搞到遲出
ROG STRIX /AORUS 呢D高階卡一定BOOST得更高
可能因為發現呢個問題要改DESIGN搞到遲出
用炒價同第三方買果d點算 
PCM
［ 2020.9.26 22:25 更新］EVGA 在官方討論區發表聲明，指廠方在量產時已發現採用 6 粒 POSCAP 的方案無法通過實際應用測試，他們花了一星期找出原因並更改為 4 粒 POSCAP ＋ 20 粒 MLCC 的設計（見上圖），也因此而推遲了產品上市。而有部分採用 6 粒 POSCAP 的量產前版本提供了給測試用戶而需要更換。他們並指出 EVGA GeForce RTX 3080 XC3 系列所採用的 5 POSCAP + 10 MLCC 方案不會出現「彈 Game 」問題
。 GeForce RTX 3080 FTW3 產品也不會採用 6 POSCAP 方案
。
［ 2020.9.26 22:25 更新］EVGA 在官方討論區發表聲明，指廠方在量產時已發現採用 6 粒 POSCAP 的方案無法通過實際應用測試，他們花了一星期找出原因並更改為 4 粒 POSCAP ＋ 20 粒 MLCC 的設計（見上圖），也因此而推遲了產品上市。而有部分採用 6 粒 POSCAP 的量產前版本提供了給測試用戶而需要更換。他們並指出 EVGA GeForce RTX 3080 XC3 系列所採用的 5 POSCAP + 10 MLCC 方案不會出現「彈 Game 」問題
。 GeForce RTX 3080 FTW3 產品也不會採用 6 POSCAP 方案。我好興奮呀.JPG
我本身想買Aorus rtx3090 xtreme，上網睇竟然冇得買
，依家咁樣真係要等到2046
，依家咁樣真係要等到2046恭喜佢哋
黑人問題
照pcm咁講
咁即係evga出貨前唔會test一次知有事
我理解有無錯
照pcm咁講
咁即係evga出貨前唔會test一次知有事
我理解有無錯
咁樣搞一搞,我諗起碼都要11月
係咪set 第一個gpu boost低過1710MHz?
