用asus個aimesh成日痴住個弱信號
金榮權
11 回覆
4 Like
0 Dislike
屌你老母執七左佢啦
Mesh保障連到線，不會保障連得快
只要連到線，就算訊號弱都不一定會斷線自動轉駁到強接點
因應每個使用環境，需要調節RSSI值
可以參考:
https://cyberraiden.wordpress.com/2025/05/18/optimize-asus-wifi-6-router-802-11ax-wireless-settings-for-better-stability-and-connectivity/
原文詳細解釋每個設定的原理及應用場境，重點就是這一段:
> Configuring Roaming Assistant on an ASUS WiFi 6 Router:
6. If enabled, set the Disconnect clients with RSSI lower than value (in dBm):
Range: Typically -90 dBm to -50 dBm.
Common settings:
-75 dBm (default): Balances performance and stability for most environments.
-65 dBm: More aggressive, for dense AP setups with close node placement.
-85 dBm: Less aggressive, for larger areas with fewer APs.
假設由B點走到A點
Case 1: 如果AP比較近，RSSI值設定為訊號強(e.g -65 dBm)，就能從B接點斷線重新接駁到A接點。如果RSSI設定為-70dBm﹐即使A接點比較強也不會轉換接點
Case 3: 如果AP比較遠，或者阻隔較大，RSSI值設定為訊號弱(e.g -85 dBm)比較好。如果RSSI設定為-70dBm﹐有機會A / B接點都連不到
只要連到線，就算訊號弱都不一定會斷線自動轉駁到強接點
因應每個使用環境，需要調節RSSI值
可以參考:
https://cyberraiden.wordpress.com/2025/05/18/optimize-asus-wifi-6-router-802-11ax-wireless-settings-for-better-stability-and-connectivity/
原文詳細解釋每個設定的原理及應用場境，重點就是這一段:
> Configuring Roaming Assistant on an ASUS WiFi 6 Router:
6. If enabled, set the Disconnect clients with RSSI lower than value (in dBm):
Range: Typically -90 dBm to -50 dBm.
Common settings:
-75 dBm (default): Balances performance and stability for most environments.
-65 dBm: More aggressive, for dense AP setups with close node placement.
-85 dBm: Less aggressive, for larger areas with fewer APs.
假設由B點走到A點
Case 1: 如果AP比較近，RSSI值設定為訊號強(e.g -65 dBm)，就能從B接點斷線重新接駁到A接點。如果RSSI設定為-70dBm﹐即使A接點比較強也不會轉換接點
Case 3: 如果AP比較遠，或者阻隔較大，RSSI值設定為訊號弱(e.g -85 dBm)比較好。如果RSSI設定為-70dBm﹐有機會A / B接點都連不到
建議唔好用呢啲software mesh 遲啲有錢正正經經買返套真mesh, 我用緊tplink deco，而家啲mesh cut曬啲lan port，唔夠用，仲要自己加錢買隻switch
好，不過我唔撚會用tplink
asus貴多幾舊，不過呢啲software嘢，我以前細細個手機都好鍾意刷rom又盛，而家大家覺得有錢就俾錢解決，放工有時間就睇多陣韓劇訓多陣好過，呢啲technical又唔知係咪work就咪貴搞
用tplink 岸鳩仔
linksys啦，以前Cisco子公司，網絡穩定有保證
用慣左asus個介面，依家奶曬野
asus router出名伏，我ac56之後都冇用佢