點解加拿大工程咁串連美國牌都唔認
海狐
78 回覆
1 Like
7 Dislike
？
加拿大不嬲都唔承認好多美國專業執照。 我當年有美國CPA牌，都要符合加拿大工作經驗同考幾科試，不過俾啱啱會計畢業生容易得多。
律師都差唔多
律師都差唔多
但美國大方認加拿大d垃圾牌
因為美國牌係州搞 而每個州考嘅嘢好似都唔同
美國佬連what the fuck is a kilometer都唔識，點做工程師
咩牌
PE都唔認
PE都唔認
垃圾red neck 唔識metric system
Miles
Miles
好似唔係所有State都承認加拿大既工程師牌
https://engineerscanada.ca/become-an-engineer/agreements-on-international-mobility
Country-specific Mutual Recognition Agreements
Engineers Canada has directly negotiated Mutual Recognitions Agreements (MRAs) with the following organizations:
Engineers Australia
France (Commission des Titres d’Ingénieur, Conseil National des Ingénieurs et Scientifiques de France)
Hong Kong Institution of Engineers
Engineers Ireland
The Nevada State Board of Professional Engineers, United States
The Texas State Board of Professional Engineers, United States
The MRAs are intended to provide licensed engineers from these bodies with an equivalent level of licensure in Canada and vice versa. Engineers Canada is not a licensing body—our role is to use our best efforts to encourage ratification of the agreement by Canada’s twelve engineering regulators, per the Ratification/Implementation clauses.
In Canada, each province or territory regulates the practice of engineering within their jurisdiction. This means that only a provincial or territorial regulator can decide whether to ratify a country-specific MRA and apply it in their licensing procedures. For information on whether an MRA is recognized in a specific Canadian province or territory, consult with the individual Canadian engineering regulatory bodies.
https://engineerscanada.ca/become-an-engineer/agreements-on-international-mobility
Country-specific Mutual Recognition Agreements
Engineers Canada has directly negotiated Mutual Recognitions Agreements (MRAs) with the following organizations:
Engineers Australia
France (Commission des Titres d’Ingénieur, Conseil National des Ingénieurs et Scientifiques de France)
Hong Kong Institution of Engineers
Engineers Ireland
The Nevada State Board of Professional Engineers, United States
The Texas State Board of Professional Engineers, United States
The MRAs are intended to provide licensed engineers from these bodies with an equivalent level of licensure in Canada and vice versa. Engineers Canada is not a licensing body—our role is to use our best efforts to encourage ratification of the agreement by Canada’s twelve engineering regulators, per the Ratification/Implementation clauses.
In Canada, each province or territory regulates the practice of engineering within their jurisdiction. This means that only a provincial or territorial regulator can decide whether to ratify a country-specific MRA and apply it in their licensing procedures. For information on whether an MRA is recognized in a specific Canadian province or territory, consult with the individual Canadian engineering regulatory bodies.
聽班工程朋友話自己考英國個牌世界通行
唔知真定假
唔知真定假一部份國家啫
仲要睇所屬個會人地受唔受理
仲要睇所屬個會人地受唔受理
加拿大認 MHKIE 唔認CEng
不過都要睇省會
不過都要睇省會
起碼有
調番轉加拿大冇一個省認
調番轉加拿大冇一個省認
Waive3年經驗only
都係要你考
都係要你考
BC 好似可以直換？
淨考份non technical 既筆試？
淨考份non technical 既筆試？
因為以前香港班engine真係勁
都要
推
推
P
當三年經驗，要當地做一年野，之後再考試同埋寫三十幾篇文
當人狗
正常啦
我係當地工程師都唔想咁多人咁易入到黎
我係當地工程師都唔想咁多人咁易入到黎
其實睇你要d 咩，香港可以直換engineer in training ，只係如果你要professional engineer 個牌的話就要考上邊d 野。
但你EIT 已經可以搵工黎做。
好多人成世都只係拿住個EIT 就算。
P.Eng 你每年都要寫一大堆report 同進修先可以keep 住
但你EIT 已經可以搵工黎做。
好多人成世都只係拿住個EIT 就算。
P.Eng 你每年都要寫一大堆report 同進修先可以keep 住